This LED conversion kit for original tail lights fits 1926-1930 Chevrolet Passenger cars & Trucks. These amazing conversions will make your old Chevy really visible from the rear! All new mounting bracket & instructions make installation easy and quick. Kits come with everything needed to change an original tail light to super bright LED! Each card features 52 Red LED's for stop, turn and tail light also 2 White LED's for the license light. Specify 6-Volt or 12-Volt when ordering. Proudly Made in the USA! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason. It's easy to see! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 4-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. Kits come with one LED card, fasteners, hardware and instructions needed to install the card into the tail light bucket. They will work with turn signal, tail light and stop light circuits.
For 1926 1927 1928 1929 1930 Chevrolet Cars and Trucks
This 7" Crystal Headlight comes with 34 Amber or Clear LEDs with Clear Lens. It is Reinforced Multi-Surfaced. The Aluminum Reflector has Anti-Vibration Design. The Halogen Bulb is a 12V 65/55W, Replaces 6017/H6024. HB2/9003 Halogen Headlight meets DOT/SAE Standards. Specify Amber or Clear LEDs when ordering.
This 7" Crystal Headlight comes with 34 Amber or Clear LEDs with Clear Lens. It is Reinforced Multi-Surfaced. The Aluminum Reflector has Anti-Vibration Design. The Halogen Bulb is a 12V 65/55W, Replaces 6017/H6024. HB2/9003 Halogen Headlight meets DOT/SAE Standards. Specify Amber or Clear LEDs when ordering.
This conversion works on all 1925-1931 cars & trucks. It eliminates the carbon (graphite) throw out bearing and changes it to a ball bearing. Very simple installation and it comes with instructions.
For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
The most complete power steering kit available. Kit includes pump (no pulley) and SBC brackets, gearbox and bracket, power steering pitman arm, column coupler, rag joint and hardware. Note: Specify stock or quick steering ratio.
This is a changeover bracket when running an alternator instead of the factory generator on 1929-1936 Chevrolet engines. NOTE: To use this bracket, it must be used with VT-18 pulley. Replaces GM# 838019
For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This is a Connecting Rod Conversion Service to Insert Bearings for 1937-1953 Chevrolet engines. Customer must provide original babbitt bearing connecting rods for conversion. This is a machining service ONLY and insert bearings must be purchased separately - See AF-550. Price listed is for one connecting rod when six rods are submitted for service.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a Complete Disc Brake Bracket Kit for 1939-1940 Chevrolet passenger cars with Knee Action front suspension. Changes to 5-lug Chevy bolt pattern. Use with your existing spindles. Top quality US made bolt-on assembly. Includes caliper mounting brackets - attaching hardware to spindle - bearing adapters (which use modern tapered roller bearings) and instructions using YOUR late model calipers - rotors - pads - seals and bearings (1972-77 Camaro or equivalent). DOES NOT WORK WITH STRAIGHT AXLE MODELS Use with your existing spindles. Top quality us made bolt-on assembly. Includes caliper mounting brackets - attaching hardware to spindle - bearing adapters (which use modern tapered roller bearings) - 1970-77 Camaro calipers - rotors - pads - seals - bearings - and instructions. Please Note: This kit is very heavy and must be shipped in several boxes. Freight charges will be high. Call or email us for a freight quote. Also consider FS-1019 Basic Disc Brake Kit for much cheaper shipping charges.
This is a Complete Disc Brake Bracket Kit for 1941-1948 Chevrolet passenger cars with Knee Action front suspension. Changes to 5-lug Chevy bolt pattern. Use with your existing spindles. Top quality US made bolt-on assembly. Includes caliper mounting brackets - attaching hardware to spindle - bearing adapters (which use modern tapered roller bearings) and instructions using YOUR late model calipers - rotors - pads - seals and bearings (1972-77 Camaro or equivalent). DOES NOT WORK WITH STRAIGHT AXLE MODELS Use with your existing spindles. Top quality us made bolt-on assembly. Includes caliper mounting brackets - attaching hardware to spindle - bearing adapters (which use modern tapered roller bearings) - 1970-77 Camaro calipers - rotors - pads - seals - bearings - and instructions. Please Note: This kit is very heavy and must be shipped in several boxes. Freight charges will be high. Call or email us for a freight quote. Also consider FS-1025 Basic Disc Brake Kit for much cheaper shipping charges.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
A specially formed radiator hose used when installing a 1955-1962 model 235 or 261 six cylinder engine in a 1947-1954 Chevrolet cars & trucks. It is larger where it connects to the 1955-1962 engine water pump connection. Made in USA. ID: of radiator end is 1-1/2", ID of water pump end is 1-3/4", centerline length is 18-1/2". Specific Applications: 1947-1953 Chevrolet & GMC Pickup Trucks; 1949-1954 Chevrolet Passenger Cars
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
NOTE: 1936 fits Low Roof Cabs ONLY. This kit completely replaces the factory wiper system. It comes with a 12 volt, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiper arms & blades, wiring and switch. Designed to fit in the stock location above the windshield. Also available is a wiper delay switch - see PA-10. A top quality product Made in the USA!
This power steering conversion kit is for all full sized Chevrolet passenger cars from 1958-1960. Kit includes a 500 Series Integral type steering box with mounting bracket, power steering hose kit, power steering pump and pump mounting brackets. This item is oversize and special freight charges will apply.
This power steering conversion kit is for all full sized Chevrolet passenger cars from 1961-1964. Kit includes a 500 Series Integral type steering box with mounting bracket, power steering hose kit, power steering pump and pump mounting brackets. This item is oversize and special freight charges will apply.
This King Bee Mirror mounting clip is used to convert the screw-on VT-57 & VT-74 mirrors into a clamp-on mirror. Mounting holes are 2" centers. Comes with two set screws.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars
This set of headlight reflectors will replace the original 1932-1936 Chevrolet car & truck reflectors. The kit comes with two reflectors with a SINGLE 12 volt halogen headlamp bulb mount in each. The units come with 12 volt halogen bulbs, cork gaskets and wiring for two headlights. NOTE: When using Halogen lights, you must have an alternator charging system as a generator cannot keep up the charging rate required by halogen bulbs. Designed to use with original headlight bucket, rim and lens. Dimensions: OD 8-9/16". Replaces GM# 914716, 919045 Specific Applications: 1932-1933 All Passenger Cars - Models BA, CA, CC; 1933-1936 All Trucks - Models CB, DB, EB, FB, O, P, Q, R 1934-1935 Standard Passenger - Models DC, EC 1939 COE Trucks
For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This TURN SIGNAL set of headlight reflectors will replace the original 1932-1936 Chevrolet car & truck reflectors. The kit comes with two reflectors with a single 12 volt halogen headlamp bulb and a turn signal bulb mounts in each. The units come with 12 Volt Halogen headlight bulbs, turn signal bulbs, cork gaskets and wiring for two headlights with turn signal bulbs. NOTE: When using Halogen lights, you must have an alternator charging system as a generator cannot keep up the charging rate required by halogen bulbs. This can cause overheating and even fire. Designed to use with original headlight bucket, rim and lens. Dimensions: OD 8-9/16". Replaces GM# 914716, 919045 Specific Applications: 1932-1933 All Passenger Cars - Models BA, CA, CC; 1933-1936 All Trucks - Models CB, DB, EB, FB, O, P, Q, R 1934-1935 Standard Passenger - Models DC, EC 1939 COE Trucks
For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This set of headlight reflectors will replace the original 1932-1936 Chevrolet car & truck reflectors. The kit comes with two reflectors with a SINGLE 6 volt halogen headlamp bulb mount in each. The units come with 6 volt halogen bulbs, cork gaskets and wiring for two headlights. NOTE: When using Halogen lights, you must have an alternator charging system as a generator cannot keep up the charging rate required by halogen bulbs. Designed to use with original headlight bucket, rim and lens. Dimensions: OD 8-9/16". Replaces GM# 914716, 919045 Specific Applications: 1932-1933 All Passenger Cars - Models BA, CA, CC; 1933-1936 All Trucks - Models CB, DB, EB, FB, O, P, Q, R 1934-1935 Standard Passenger - Models DC, EC 1939 COE Trucks
For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This is a Starter Motor rebuilding service for all 1929-1934 Chevrolet cars & trucks. This service requires that we rebuild your original starter motor. Send in your original and allow 2-3 weeks for service. Replaces GM# 827131, Delco #714L Specific Applications: 1929-1934 All Cars & Trucks (exc. 1934 Master or Truck) If no rebuildable core is supplied, there will be an additional charge to supply a core, when available. Note: This item is very heavy and requires special shipping charges. Call or email us for a freight quote.
For 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
This Raingear Wiper System fits 1967-1972 Chevrolet pickups. This kit mounts inside of the airbox, which is located beneath the cowl panel on the outside of the truck, below the windshield. The relocation of this kit to the airbox from the original position under the dash frees up space under the dash to accommodate a computer when doing an LS swap. This kit features a 12 volt, ten amp, two-speed electric motor and comes complete to work with your original wiper arms, blades, switch bezel and switch knob. NOTE: When installing this kit you will need to install a passenger side defroster duct, on the driver side to allow room for the new switch and wiring. For a kit including a wiper delay switch, see PA-37D. Made in the USA!
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This Raingear Wiper System WITH WIPER DELAY SWITCH fits 1967-1972 Chevrolet pickups. This kit mounts inside of the airbox, which is located beneath the cowl panel on the outside of the truck, below the windshield. The relocation of this kit to the airbox from the original position under the dash frees up space under the dash to accommodate a computer when doing an LS swap. This kit features a 12 volt, ten amp, two-speed electric motor and comes complete to work with your original wiper arms, blades, switch bezel and switch knob. NOTE: When installing this kit you will need to install a passenger side defroster duct, on the driver side to allow room for the new switch and wiring. For a kit without a wiper delay switch, see PA-37. Made in the USA!
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Voltage Regulator Conversion for 6 or 12 volt voltage regulators on 1940-1962 Chevrolet cars & trucks - Negative Ground Only. This service removes the internal mechanical contact points and replaces with electronic regulator. A safer and more efficient system of regulating the charging system in vintage vehicles. You must send in your original voltage regulator and allow 3-4 weeks for this rebuilding service.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This 6-volt LED Conversion fits all 1940-1953 Chevrolet & GMC Trucks. This card comes with 36 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and simple to follow instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 6-volt LED Conversion fits all 1931-1936 Chevrolet passenger cars This card comes with 56 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.